WIT pneumatic --- PU0805-100M (PU/PA/PE AIR HOSE)

1.Character:
(1) With good resistance to high pressure,vibration,abrasion,climate and flection.
(2) Light,fixed easily,convenient for fitting.
(3) With high precsion in dimension control,applying for all kinds of connector.
(4) Many colors for choosing.

2.Techincal parameters:
(1) Standard Size - 4X2.5,6X4,8X5,10X6.5,12X8MM
(2) Standard Color - Transparent,Blue,Black,Orange
(3) Material - Polyurethane
(4) Max. Pressure Resistance - 1.0MPa
(5) Length Type - Spiral or Roll

3.Installation Instructions:
(1) Check is there any surface hurtedor distortion to be ellipse.
(2) The tube should touch the bottom of the fitting when fixed,or it may be lead to leak.
(3) Make sire the tube can't be pushed out when fixed up. (Never use excess strengh,or the fitting will be distroyed).
(4) When releasing the tubes,please note.
(5) Before releasing the tube,please ensure the pressure to the zero,press the releasing ring to the end uniformly,and pull out the tubes,if not completely push in the ring,the tubes could not be pulled out or damaged the tube,and tube scraps will remained in inner tube,resulting in the possibleof leakage.
(6) While Assembly tube,the outer diameter of the tube shall meet the requirements of tolerance.